Patterned Flooring
Comparison Data for POLKA PLATE
1. Non-slip surfacing like conventional striped plates
We studied the non-slip effect of striped plates, their most important function. Fig. 1 shows a comparison of the slip resistance for POLKA PLATES and CHECKERED PLATES when placed adjacent and at a 45-degree angle. The non-slip effect was equivalent.
2. Similar non-slip effect
There is little difference in the non-slip effect whether POLKA PLATES or CHECKERED PLATES are used.
Fig. 1. Comparison of the non-slip effect of POLKA PLATES and CHECKERED PLATES under dry conditions

Test method: The maximum load when pulling work shoes at a fixed rate was used as an index.
Photograph 1. Test direction for the non-slip effect of dot plates

Photograph 2. Test direction for the non-slip effect of CHECKERED PLATES

3. Stable, non-slip effect
The slip resistance is shown in Fig. 2 for when the plates are dry, wet and coated with lard. The POLKA PLATES maintain their stable non-slip effect regardless of the conditions.
Fig. 2. Comparison of the non-slip effect under various conditions

4. Low foot stress
Photograph 3 shows the contact area of the soles of safety shoes when stepping on POLKA PLATES and on CHECKERED PLATES. The contact surface ratio is 2:1. These results show that the POLKA PLATES have twice as much shoe contact area as CHECKERED PLATES, therefore decreasing the load on specific areas of the sole of the foot, and making them suitable even when standing for long hours.
Photograph 3. Comparison of the contact area of shoe soles with POLKA PLATES and CHECKERED PLATES

POLKA PLATES

CHECKERED PLATES